Kit Inlcudes the snow blade and attaching parts. Retro-fit Kit is available separately.
Full working range
The 44-in. (112-cm) Front Blade can be operated from 1 in. (2.5 cm) below ground level to 5 in. (13 cm) above ground level. A 3-in. (8-cm) floating action is designed into the lift linkage, so the blade is free to follow the contour of the ground. The lift-linkage design makes raising the blade an easy job.
Easy-on, easy-off mounting system
The blade can be installed or removed in minutes. No tools are needed to remove the blade, and no heavy lifting is required.
Adjustable skid shoes
Adjustable skid shoes on each side of the blade allow the operator to select the correct blading height for various conditions and jobs. Skid shoes can be adjusted to any of seven different heights, supporting the blade at the selected level as it moves along the ground surface.
Heavy-duty blade construction built to last
Constructed of heavy, 0.12-in. (3-mm) thick steel, the front blade has a reinforcing angle behind the front edge and a replaceable cutting edge. The cutting edge takes most of the wear to greatly extend the useful life of the blade.
44-in. (112-cm) Front Blade
44 in. (112 cm)
15 in. (38 cm)
Blade angled 25 degrees
40 in. (102 cm)
Number of positions
Right and left
Range of lift (blade positioned straight forward):
Above ground level
5 in. (127 mm)
Below ground level
1 in. (25 mm)
0.12 in. (3.05 mm)
Replaceable scraper edge
0.188 in. (4.76 mm)
74 lb (34 kg)
This 44-in. (112-cm) Front Blade is compatible with LX Lawn Tractors and GT Series and GX255 Garden Tractors:
· Hand-lift tractors require the BM21360 retro-fit kit.
Additional requirements and/or recommendations:
· Rear weights and tire chains are recommended for additional traction.
· M146542 rubber squeegee kit is recommended for better cleaning action and protection of smooth surfaces.