Hard Top Cab Enclosure For 3032E and 3038E

Part Number: 11980
7 Review(s)
Hard Top Cab Enclosure For 3032E and 3038E
Hard Top Cab Enclosure For 3032E and 3038E
Write a Review
Your Price: $1,095.00
Hard Top Cab Enclosure For 3032E and 3038E
Free Shipping
Brand Original Tractor Cab

Description

Hard top cab enclosure that will fit the 3025E 3032E and 3038E Installation time will take roughly three to four hours. There will be no holes to drill, the cab mounts use existing holes.

Key Features of Cab
  • No holes to drill, the cab mount using existing holes.
  • Installation time will take roughly three to four hours.
  • Removal will take approximately 45 minutes.
  • Fully enclosed cab with an ABS plastic hard top.
  • Clear shatter resistant Lexan plastic is used in the rear curtain, side doors and the windshield for maximum visibility.
  • The Lexan windshield can easily be replaced with the optional safety glass windshield, which is available for purchase separately. Forward inclination of the windshield minimizes glare and contact with falling snow and rain.
  • Doors are hinged with latches so getting in and out of the cab is easy and quick.
  • Doors can be removed during summer, allows canopy to double as a sun shade.
Fits The Following Models:
  • 3032E
  • 3038E
  • 3025E
This hard top cab enclosure is not a genuine Deere item. It is manufactured by one of the leading aftermarket cab, canopy and sunshade manufacturers. It is made in the USA. It carries a one year warranty

This cab will fit folding or non-folding rops. 

Cabs are designed to be 84” depending on tire size. 

The 11980 will NOT fit new style tractors with the fuel filler behind the seat.


Optional attachments are shown below in Related Items

*All Original Tractor Cab Products are Subject to a 15% Restocking Fee*

Features

  • California use info:

    ⚠ Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Customer Reviews

Very Pleased
Purchased my 3038e in March 14 primarily for blowing snow. Couldn't find a cab that I was pleased with in terms of price and convenience, so I called Original Tractor Cab. Was told at that time that the cab for the 3038e and the 3032e were next on the drawing board. Was happy to find that they had followed through on their word and so ordered it up this fall. Had a problem with the installation because I have hydraulic hook ups on the back of my tractor to be able to move the snow chute around when blowing snow. I called OTC and talked to Chris Geise. Chris gave me phenomenal service. I told him what I thought I could do to make the cab fit on my tractor and he even offered to send me a new rear panel for free if it didn't work. I thought that was above and beyond. My idea worked perfectly and I've been able to use my snow blower and tractor with cab about four times this November. I couldn't be more pleased with how it blocks the wind, keeps the snow out of my face and still permits me to see to clear driveways. Thank you OTC and thank you Chris.
Did you find this helpful?  9 of 9 Found Helpful
Reviewed by:  from Big Lake, Minnesota. on 11/21/2014
5
sales
fit and finish appropriate for cost. installation straight forward
Did you find this helpful?  6 of 6 Found Helpful
Reviewed by:  from Copley, oh. on 1/18/2016
4
Hard Top Enclosure
Looked high and low for a cab for my 3032e. The price point was perfect. Installation took a little longer than 3-4 hours but followed instructions and everything fit. The hard top is slightly higher than the ROPS which prevented the tractor from entering my garage without removing some weather-stripping. I will need to find solution for this. I haven't had opportunity to use it since installed. I will be ordering the windshield wiper kit next. I am sure I will enjoy being out of the weather this year as last year was BRUTAL.
Did you find this helpful?  6 of 6 Found Helpful
Reviewed by:  from Iowa. on 12/26/2014
5
Happy to have a cab
I would recommend that you tag the parts with a stick on tag that would show you the part that is in the assembly instructions. This would speed up the assembly of the cab. I have been fully satisfied with your product.I upgraded to the glass windshield and it is a plus to the cab.I have used my cab on two separate occasions and have been comfortable in it without any added heat source. So if you have any upgrades please contact me and i will be interested.
Did you find this helpful?  5 of 5 Found Helpful
Reviewed by:  from Country Club MO . on 2/14/2015
5
Acerage owner
What a nice cab. It arrived quickly, and the fit was much better than I expected. It took longer than I had expected to install as the instructions miss a few points such as the top frame should only go on one way, so I had to remove a few items and reinstall. I wish the rollbar would have been utilized instead of a free standing frame as it would make it much more solid. Overall I am very happy with this item.
Did you find this helpful?  5 of 7 Found Helpful
Reviewed by:  from Fort Calhoun, Ne. on 12/11/2014
4

Recently Viewed Items

TOP
0 Items