Hard Sided Curtis Cab For John Deere 1023 1025 1026 1JD1FPR

Part Number: 1JD1FPR
3 Review(s)
Hard Sided Curtis Cab For John Deere 1023 1025 1026 1JD1FPR
Hard Sided Curtis Cab For John Deere 1023 1025 1026 1JD1FPR
Write a Review
Your Price: $4,826.84
Hard Sided Curtis Cab For John Deere 1023 1025 1026 1JD1FPR
Free Shipping
Brand Curtis Cabs


John Deere 1023E | 1025R | 1026R Premium Cab

  • Corrosion-resistant powder-coat finish
  • Pin-hinged/removable doors are assisted with gas shocks
  • Door windows open with dual sliders
  • Venting windshield supported on gas shocks; 2 locking positions, venting and closed
  • Cab matches John Deere green to complement vehicle
  • Factory fender lights are easily relocated to cab side frame for front or rear illumination
  • 12 volt heavy-duty front windshield wiper
  • Removable rear glass panel lifts out in seconds
  • Locking doors
  • Backhoe compatible


  • Cab weight: 318 lbs.
  • Cab shipping weight: 450 lbs.
  • Height above floorboard: 61 inches floorboard to roof
  • Backhoe compatible: Yes
  • Windshield: Glass
  • Door windows: Glass
  • Rear panel: Glass
  • Roof: Steel with acoustical headliner
  • Wiper: 110 degree sweep
  • Pre-drilled holes for optional side mirrors


  • Heater: Hot water heater with adjustable vents (9PH20S59)
  • Rear wiper (9PWK65T)
  • 3 inch round work lights (9LEDW3)
  • 3 x 6 inch oval work lights (9LEDW2)
  • 2 x 6 inch low-profile work lights (9LEDW4)
  • LED strobe light (9LEDS1)
  • Interior dome light (9LEDD10)
  • Switch panel (9PSF1)


Shipping Policy

This item drop ships from the manufacturer. Due to the size or required packaging of this item, it must ship truck freight. This truck freight items ship for free to your door in the contiguous United States. Please allow 10-15 business days for delivery on ALL truck freight items. Tracking updates are not available on this item.



  • California use info:

    ⚠ Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Feature 13


Customer Reviews

End User
After my experience purchasing from the Green Dealer, and installing this Curtis cab, would I do it again? ABSOLUTELY! The cab arrived with no shipping damage. Unpacking took a bit of time as each and every piece was individually wrapped in a heavy blanket. Make sure you have the space to lay everything out. For ease of installation, remove all tractor attachments such as loader, mower, backhoe, etc. Somewhere in the included documentation it said to allow three hours for assembly, but don't believe that for a second. For everything involved, if you're picky, 8 to 10 is a better guess. Not that that is a complaint, there is just a lot to do. From unpacking, wiring the tractor and removing some parts for relocation, to cab assembly and adjustment and rereading the instructions six times, it's a long day. The instruction sheet is somewhat unclear in a few places, and the small black and white pictures leave questions at times. That said, each and every piece of the cab was flawless, every piece of hardware was included as stated, and all fit together perfectly. All welding and metal forming was well done. In a couple places in the instructions it stated that assistance would be needed, but one person can do this by themselves as it worked for me. Time spent would be shortened with two assemblers though. Once completed, this cab fits very well, is EXTREMELY solid, and should provide many years of enjoyable service. The biggest surprise was how roomy the interior is, no one should complain about being cramped. It is not airtight in the floorboard area by any means, but as good as can be expected. As I said, without any hesitation I would make this purchase again. I do wish cost was less. And thanks to the Green Dealer for their great service.
Did you find this helpful?  26 of 28 Found Helpful
Reviewed by:  from Iowa. on 7/2/2017
This is a great cab. I purchased it in December 2017 for my John Deere 1025r. It’s been in use for two months and I can report that the overall the fit & functionality of the cab is excellent. Fully assembled the cab works great in the winter. I have used it several times for snow blowing my very long driveway during the day and at night in sub-zero temperatures. The cab warms up nicely, the front wiper is great and the added LED lights on top do an excellent job lighting up the area. It took two of us two full days to assemble it on the tractor. The directions are very good, however, I have the old style hood hinge assembly and had to have this part shipped separately. I decided to remove the hood during assembly and I would highly recommend doing this to give full access to the engine compartment. The heater installation instructions were a little vague in that they recommended draining the cooling system. I did a fair amount of research trying to figure this out and decided instead to cut the hoses as noted and let the antifreeze drain into a bucket then added new antifreeze once everything was back together.
Did you find this helpful?  20 of 21 Found Helpful
Reviewed by:  from Granger, IN. on 2/4/2018
Premium Curtis Cab John Deere 1025R
Very well built cab and packaging was excellent. Installation took about 10 hours. I also bought the switch box, front works lights, mirrors and the heater. All the parts are great quality. The thing I like about this cab over the others is the sliding windows in the doors. The doors close as good as most cars. The crate it comes in is big, probably 6’x6’x2’.... and weighs around 425 pounds.
Did you find this helpful? 
Reviewed by:  from Texas Panhandle. on 4/17/2021

Recently Viewed Items

0 Items