44 Inch Front Blade for LT and LTR Tractors

Part Number: 9480M
0 Review(s)
44 Inch Front Blade for LT and LTR Tractors
44 Inch Front Blade for LT and LTR Tractors
Write a Review
Your Price: $750.00
44 Inch Front Blade for LT and LTR Tractors, 9480M
Free Shipping
Brand John Deere


This listing is for the blade and attaching hardware. Retro-fit kit is not included and is available separately. 

Full working range

The 44-in. (112-cm) Front Blade can be operated from 1 in. (2.5 cm) below ground level to 5 in. (13 cm) above ground level.
A 3-in. (8-cm) floating action is designed into the lift linkage, so the blade is free to follow the contour of the ground.
The lift-linkage design makes raising the blade an easy job.


Easy-on, easy-off mounting system

The blade can be installed or removed in minutes. No tools are needed to remove the blade, and no heavy lifting is required.


Adjustable skid shoes

Adjustable skid shoes on each side of the blade allow the operator to select the correct blading height for various conditions and jobs.
Skid shoes can be adjusted to any of seven different heights, supporting the blade at the selected level as it moves along the ground surface.


Heavy-duty blade construction built to last

Constructed of heavy, 0.12-in. (3-mm) thick steel, the front blade has a reinforcing angle behind the front edge and a replaceable cutting edge.
The cutting edge takes most of the wear to greatly extend the useful life of the blade.


44-in. (112-cm) Front Blade

Overall width 

44 in. (112 cm)

Overall height

15 in. (38 cm)

Cutting width:


Blade straight

44 in. (112 cm)

Blade angled 25 degrees

40 in. (102 cm)

Angling positions:


Number of positions


Right and left

25 degrees

Range of lift (blade positioned straight forward): 


Above ground level

5 in. (127 mm)

Below ground level

1 in. (25 mm)

Material thickness: 



0.12 in. (3.05 mm)

Replaceable scraper edge

0.188 in. (4.76 mm)

Weight, approximately

74 lb (34 kg)

Requirements and/or recommendations:
  1. LT Tractors with a hand-lift system require BM21360 retro-fit kit.
  2. Rear weights and tire chains are recommended for additional traction.
  3. BM20796 lift-assist kit is available for LT150, LT160 and LT170 Tractors to reduce effort by 40 percent to raise the front blade. Also order the lift-assist kit for LT180 if the tractor was ordered less mower and is not already equipped with M134323 internal lift-assist spring.
  4. M146542 rubber squeegee kit is recommended for better cleaning action and protection of smooth surfaces.


  • California use info:

    ⚠ Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Feature 13


Related Items

Recently Viewed Items

0 Items