|
|
John Deere 54" Mulching Kit Fits 7 Iron & 7 Iron II Decks
|
Price: $280.00
Sale Price: $266.00
You Save: $14.00 (5 %)
Manufacturer: John Deere
: TCB11469
new 54" mulching kit from John Deere, that will fit the 7-Iron & 7-Iron II decks. The mulching attachment allows converting the mower so it can be used to mulch grass or leaves. Remember you will have to follow the 1/3rd rule. No more than 1/3 of the grass blade should be cut off at one time. This allows more efficient mulching and will promote the continued good health of the grass. If the desired cut height can't be achieved by cutting off 1/3, or there is clumping of the clippings, it may be required to cut higher; wait a day, then lower the mower and make a second pass. Mow at proper intervals approximately every 4 to 5 days.
This kit also includes installation instructions. This kit does not fit any other 54" decks. If you are unsure which deck you have on your mower email or call us so we can help you determine which deck you have.
This 54" mulching kit is compatible on the following models with 54" 7 Iron & 7 Iron II Decks.
|
657A Commercial Quik-Trak with 54 In. 7-Iron Deck
|
|
657A Commercial Quik-Trak with 54 In. 7-Iron II Deck
|
|
717A Commercial Mini-Frame Z-TRAK with 48 In. 7-Iron II Deck
|
|
727A Commercial Mini-Frame Z-TRAK with 54 In. 7-Iron II Deck
|
|
727A Commercial Mini-Frame Z-TRAK with 54 In. 7-Iron II Deck
|
|
737 Commercial Mid-Frame Z-TRAK with 54 In. 7-Iron II Deck
|
|
757 Commercial Mid-Frame Z-TRAK with 54 In. 7-Iron Deck
|
|
757 Commercial Mid-Frame Z-TRAK with 54 In. 7-Iron II Deck
|
|
757 Commercial Mid-Frame Z-TRAK with 54 In. 7-Iron II Deck
|
|
7H19, 19 H.P. Commercial Hydrostatic Drive Walk-Behind Mower with 54 In. 7-Iron Deck
|
|
7H19, 19 H.P. Commercial Hydrostatic Drive Walk-Behind Mower with 54 In. 7-Iron II Deck
|
|
Z520A Z-Trak Estate Residential Zero-Turn-Radius Mower with 54 In. 7-Iron Deck
|
Please allow seven to ten business days for delivery of this item.
|
|
|
| Operating tips for 54-in. mulching kit
|
|
|
Mulching:
-
Mow when grass is dry
-
Observe the 1/3 rule
-
No more than 1/3 of the grass blade should be cut off at one time; this allows more efficient mulching and will promote the continued good health of the grass; if the desired cut height can't be achieved by cutting off 1/3, or there is clumping of the clippings, it may be required to cut higher; wait a day, then lower the mower and make a second pass
-
Mow at proper intervals—approximately every 4 to 5 days
-
Always mow with sharp blades
-
When using the mulch kit, clippings are held in suspension under the mower until the PTO is shut off or the engine speed is reduced to slow the mower blades; when ready to stop mulching, slowing the engine speed while continuing to drive over the cut area will allow the suspended clippings to fall and disperse more evenly over the lawn
Tips for special situations:
-
If mulching performance is not satisfactory, raising the mower to increase cut height, even a little bit, will often make a big difference
-
If excessive clippings appear at the left edge of the mower, the left rear mower lip should be removed (if the mower is so equipped); this will promote better distribution of clippings
|
|
|
|
If you have any questions about this part call us at 1-888-473-6357. |
Product Reviews
|
|
|