Dirt Works Disc Plow & Tool Bar Combo

Our best selling implement is our most versatile implement. It cuts .. It digs …It slices … It dices … It even makes julienne fries – okay, maybe not the fries, but it definitely gets the job done! The 14” notched disc blades are constructed of agricultural grade, hardened steel that provide substantial ground penetration. If it is food plot preparation or just cutting up virgin ground, our Dirtworks Discs are your implement of choice.

• The two individual gangs of (4) discs are easy to attach to the DirtWorks 3-Point and tool bar and take up hardly any storage space compared to many tow-behind disc models.
• Five adjustable cutting angles to accommodate different soil types and conditions
• Live axle and sealed ball bearing design
• 54” width
• Accessory Tool Bar included
• Perfect for smaller compact utility tractors with Cat 0 3-pt hitch
  

 Factory Direct Item. Rush Shipping Not Available.

General Use and Maintenance:
- With proper care the DirtWorks Disc will give you many years of dependable service. After use we recommend that you clean off any mud, dirt or debris that might have accumulated on your implement. As with any ground engaging implement, paint scratches and worn paint will be evident after its first use. We recommend either painting exposed bare metal surfaces with any type of black spray paint intended for metal objects. Use of moisture displacing oils such as “WD-40” should keep the implement from rusting also.

- Disc Plows or “Disc Harrows” as some in the industry call them are typically not used to “turn over” new ground, and it is recommended that if you have purchased the Disc Plow for new soil preparation that you allow extra time for working the soil to achieve the desired results. Disc Plows will cut established turf, but will require additional passes. We recommend removing as much of the grass and over growth as possible. When you get started, start with shallow cuts in the soil until you get a feel for how deep your tractor can handle cutting without over working your tractors Engine. You are better to make multiple cuts over the same area, than to try to make a single pass at a very deep cutting depth. This process of multiple passes will also result in better
ground preparation and seed germination.

- The 14” Notched Discs are specially heat treated and sharpened to provide a durable cutting edge. You may experience a chipped disc edge at times; however, this doesn’t affect the Discs’ ability to cut. If a disc should “break” Kolpin recommends that you replace it immediately to prevent damage to the bearings or the main disc assembly.

Warranty Information:
The 14” Notched Disc and the Spindle Bearings are “Wear Items” and are not covered under the
Kolpin Outdoors, Inc. warranty program. Kolpin does stock replacement parts for either item if in
the event you should need a replacement. All other items listed are covered under our 1 year
warranty. Contact Kolpin Customer Service for warranty information.